>	Home
>	Factory Store
>	How To Use The BorZit System
>	Sand Points and Well Drilling
>	Core Bit Adapter
>	About Us
>	Testimonials
>	Photo Gallery
>	Benefits
>	Guarantee and Warranty
>	Contact Information

Jim Hill
BorZit Systems
1-800-803-8738
618 Barnett Ave
PO Box 748
Encampment, WY 82325

Core Bit Adapter

Core Bit Adapter On Tool
Core Bit Adapter Attached To The BorZit Tool

Borzit System In Storage Case
The BorZit System Shown With The 2" Bit and Optional 3" Bit In Polyethylene Case

7 1/2" Hardsurfaced Reamer

5" Hardsurfaced Reamer

3" Hardsurfaced Bit

2" Hardsurfaced Bit

1 1/4" Hardsurfaced Bit

Borzit Bits
left to right: 1�", 2", 3", 5", 7 � "

BorZit System Setup
BorZit System Ready to Begin Bore

Starting The Bore
Open Water Valve, Start Drill and Begin Bore

Joint Of Drill Pipe Added
Add joints of drill pipe and continue the bore as before until the bore is complete.

Removing Bit
After Completing Bore, Remove The Bit and Attach Pipe Or Wire To Be Left In The Hole To The Drill Pipe And Pull Back Through.

Pulling Cable
Telephone Cable Attached To Drill Pipe Ready To Be Pulled Back Through Bore.

PVC Attached To Drill Pipe
PVC Attached To Drill Pipe So The PVC Can Be Pulled Back Through The Bore.

BorZit ready to use

Boring Under A Motel
60 Foot Bore To Replace A Water Line

Boring In Parking Lot
32 Foot Bore Under Pavement In Shopping Center Parking Lot

Portable GFCI

Well Drilling
Using a torpedo level to ensure the bore is vertical

Well Drilling
Boring pilot hole with 3" bit

Well Drilling
BorZit System ready to begin boring with 5" reamer

Well Drilling
Beginning bore with 5" reamer to install 4" PVC casing

Well Drilling
Continuing bore with 5' reamer

Sand Point
Starting bore to install Sand Point

Boring through coral

Installing another sand point in Naples, Florida.

Removing joint of drill pipe
Using drill pipe clamp while removing a joint of drill pipe

Drill Pipe Clamp
Drill pipe clamp holds 3/4" pipe and coupling while adding or removing a joint of pipe

Using Core Bit Adapter
Core bit adapter and coring bit attached to BorZit Tool

Using Core Bit Adapter
Drilling through brick wall with the core bit adapter and 1 1/4" core bit.

Using Core Bit Adapter
Completed installation

Affordable BorZit System Pays For Itself Over and Over Again!